[2024] Earn Quick And Easy Success With HPE0-S59 Dumps
Free HPE0-S59 pdf Files With Updated and Accurate Dumps Training
NEW QUESTION # 30
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- B. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- C. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- D. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
Answer: B
NEW QUESTION # 31
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 32
What is a restriction of using a RoCE network?
- A. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- B. It does not support Private VLAN and Multicast VLAN.
- C. It does not support smart link and private network features.
- D. It is by default configured as an untagged network and cannot be a part of a network set.
Answer: D
NEW QUESTION # 33
Which statement about login redistribution is true?
- A. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- B. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- C. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- D. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
Answer: C
Explanation:
Login redistribution is a feature that ensures logins are balanced across available FC (Fibre Channel) links.
This process helps maintain optimal performance and redundancy by redistributing logins if they are not evenly distributed. This feature is essential in environments where maintaining balanced load distribution is critical for performance and reliability.
NEW QUESTION # 34
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan:Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server:Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image:Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface:Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
NEW QUESTION # 35
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Pause flood protection
- C. Storm control
- D. sFlow
Answer: D
NEW QUESTION # 36
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE Synergy logical component with their respective definitions:
* Enclosure groupDefinition:Contains the configuration intended for a set of physical enclosures.
* Logical enclosureDefinition:A logical resource that defines a consistent configuration for an enclosure or a set of enclosures making up a logical enclosure.
* Logical interconnectDefinition:A single administrative entity that consists of the configuration for a set of interconnects in a single enclosure or a frame link topology.
* Logical interconnect groupDefinition:Acts as a recipe for creating a group that represents the available networks, uplink sets, and interconnect settings for a set of physical interconnects in a set of enclosures.
* Enclosure group:An enclosure group in HPE Synergy defines the configuration settings, including logical interconnect groups and firmware baselines, for a set of physical enclosures.
* Logical enclosure:A logical enclosure in HPE Synergy is a resource that includes one or more physical enclosures and their associated logical interconnects, providing a consistent configuration for those enclosures.
* Logical interconnect:A logical interconnect represents a set of interconnects within an enclosure, managed as a single entity. It includes the configuration of the interconnects and their connections.
* Logical interconnect group:A logical interconnect group (LIG) defines the network configuration, including available networks, uplink sets, and interconnect settings, that can be applied to multiple enclosures.
NEW QUESTION # 37
Which compute node parameters are captured within server hardware type?
- A. Number of the CPUs
- B. installed operating system
- C. Mezzanine card configuration
- D. Size of the memory Installed
Answer: C
Explanation:
The server hardware type in HPE OneView captures parameters such as the mezzanine card configuration.
This information is crucial for defining the connectivity and expansion capabilities of the compute node, ensuring that the appropriate resources are available for specific workloads.
NEW QUESTION # 38
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Pause flood protection
- C. Storm control
- D. sFlow
Answer: A
Explanation:
Port flap protection is a feature of the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy that can be configured to disable ports experiencing frequent up and down transitions. This feature helps to stabilize the network by preventing the disruptive effects of port flapping.
NEW QUESTION # 39
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Firmware Compliance Report
- B. HPE OneView Update Readiness Checker
- C. HPE OneView Global Dashboard
- D. HPE Composer Maintenance Console
Answer: D
NEW QUESTION # 40
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. App Volume Set
- B. Virtual Volume Set
- C. Storage Container
- D. virtual Volume
Answer: B
NEW QUESTION # 41
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Loop protection
- B. LLDP tagging
- C. Pause flood protection
- D. Storm control
Answer: D
NEW QUESTION # 42
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At HPE OneView Interface to verify whether the server is In the maintenance mode
Answer: B
NEW QUESTION # 43
Which statement about HPE Superdome Flex 280 is true?
- A. It supports 2 to 8 sockets in 2-socket increments.
- B. It must be equipped with at least 768 GB of memory.
- C. it cannot be managed using HPE OneView.
- D. It can support up to two nPars with an external RMC.
Answer: A
NEW QUESTION # 44
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- B. The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.
- C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
Answer: C
Explanation:
HPE Synergy management rings have a maximum capacity for the number of frames they can manage. With
18 frames already managed in 6 logical enclosures, adding 5 more frames would exceed this capacity.
Therefore, the customer needs to create a new management ring for the new logical enclosure to ensure proper management and operation.
NEW QUESTION # 45
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
Answer: C
NEW QUESTION # 46
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE Superdome Flex system
- C. HPE ProLiant DL580 Gen10
- D. HPE ProLiant OL380 Gen 10 Plus
Answer: B
Explanation:
The HPE Superdome Flex system is the only HPE compute system that supports up to 16 CPU sockets, making it suitable for customers who require a hardware platform with such high scalability. The Superdome Flex is designed for mission-critical workloads and provides exceptional scalability and performance.
NEW QUESTION # 47
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If the D3940 module is imported in managed state that allows volume provisioning.
- C. If there is at least one ISCSI network configured that will provide access to the module.
- D. If there Is a logical interconnect created based on the 12Gb SAS switches.
Answer: B
NEW QUESTION # 48
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased
50 HPE.
ProLiant DK385 Gen10 Plus v2.They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?
- A. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.
- B. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
- C. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
- D. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
Answer: D
Explanation:
HPE OneView can manage both Synergy and ProLiant systems, allowing for centralized management of all infrastructure components. By adding the HPE ProLiant DL385 Gen10 Plus v2 systems to the existing HPE OneView instance used for Synergy, the customer can streamline management processes and maintain a unified management interface for all systems.
NEW QUESTION # 49
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It only supports NVDIMM Persistent Memory.
- B. It cannot be mixed with Gen9 compute modules in the same frame.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
Answer: A
NEW QUESTION # 50
......
Real Updated HPE0-S59 Questions Pass Your Exam Easily: https://dumps4download.actualvce.com/HP/HPE0-S59-valid-vce-dumps.html