Apr-2026 Pass Your D-VXR-DS-00 Exam at the First Try with 100% Real Exam
Get Real Exam Questions for D-VXR-DS-00 with New Questions
NEW QUESTION # 39
What are two reasons to provide minimum ceiling clearance above a VxRail rack? (Choose two.)
- A. Service access
- B. Airflow management
- C. Room for forklift
- D. Sprinkler system
- E. Anti-static protection
Answer: B,D
Explanation:
Sprinkler systems require adequate ceiling clearance for proper fire suppression coverage.
Airflow management needs sufficient clearance above the rack to maintain cooling efficiency and prevent overheating.
NEW QUESTION # 40
What are the benefits of using the VxRail design process?
(Choose two)
Response:
- A. Optimized node performance
- B. Predictable deployment timelines
- C. Reduced physical rack space requirements
- D. Improved fault tolerance
Answer: B,D
NEW QUESTION # 41
Which document from the VxRail Configuration Portal can be used to validate site readiness before a deployment?
- A. Configuration Report
- B. Pre-deployment Checklist
- C. Deployment Planning Guide
- D. Getting Started Guide
Answer: B
Explanation:
The Pre-deployment Checklist from the VxRail Configuration Portal is used to validate site readiness by ensuring all necessary prerequisites and environment conditions are met before deployment.
NEW QUESTION # 42
A VxRail architect is planning to deploy a new cluster. The servers equipped with two network cards with different uplink speeds between the two cards.
What vSphere Distributed Switch design should be used to ensure the highest performance and security?
- A. A predefined network profile with 4x10 Gb or 4x25 Gb interface speed
- B. Maximum Transmission Unit set to 9000
- C. Two new vSphere Distributed Switches
- D. Guest VM traffic assigned only to a single top of rack switch
- E. Resource-intense networks like vSAN assigned to higher speed uplinks
Answer: E
Explanation:
Assigning resource-intensive networks like vSAN to the higher speed uplinks ensures that critical traffic benefits from the best available network performance, optimizing throughput and maintaining security by separating traffic types appropriately.
NEW QUESTION # 43
Which VxRail deployment feature improves storage efficiency for large workloads?
Response:
- A. Deduplication and compression
- B. Multipath I/O
- C. RAID 5 protection
- D. Node replication
Answer: A
NEW QUESTION # 44
Which protocol must be configured on the ToR switch to allow automated discovery of a VxRail node?
- A. IPv6 multicast
- B. IPv4 multicast
- C. LLDP
- D. VxLAN
- E. Loudmouth
Answer: C
Explanation:
LLDP (Link Layer Discovery Protocol) must be configured on the ToR switch to enable automated discovery of VxRail nodes during deployment.
NEW QUESTION # 45
What parameters are evaluated by Live Optics to optimize VxRail node configurations?
(Choose two)
Response:
- A. Memory usage patterns
- B. Cluster expansion needs
- C. Historical CPU utilization
- D. Network throughput requirements
Answer: A,C
NEW QUESTION # 46
What is the minimum number of hosts required to enable fault tolerance in a VxRail cluster?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 47
What is a design consideration when integrating Dynamic Nodes into a VxRail cluster?
Response:
- A. Ensuring consistent vSphere versions across nodes
- B. Using only hybrid storage configurations
- C. Enabling RAID 10 for fault tolerance
- D. Configuring external storage for dynamic workloads
Answer: D
NEW QUESTION # 48
Which data source provides virtualization, storage and network metrics that can be imported into the VxRail Sizing tool?
- A. RVTools
- B. Live Optics
- C. Sizer Export
Answer: B
Explanation:
Live Optics collects and provides detailed virtualization, storage, and network workload metrics that can be imported into the VxRail Sizing Tool to inform accurate sizing and planning.
NEW QUESTION # 49
What is the main advantage of using the "Validate Configuration" option in VxRail Manager?
Response:
- A. It ensures compliance with hardware and software prerequisites.
- B. It adjusts cluster performance automatically.
- C. It resolves IP conflicts before deployment.
- D. It applies VMware licenses.
Answer: A
NEW QUESTION # 50
In a VxRail 2-node configuration, where should the witness host be located?
Response:
- A. Across a WAN with dynamic IP allocation
- B. At a third, independent site
- C. On a dedicated VLAN within the same site
- D. Within one of the two cluster nodes
Answer: B
NEW QUESTION # 51
What is a primary function of the vSAN in a VxRail cluster?
Response:
- A. Provides high-capacity archival storage
- B. Manages the VxRail management console
- C. Offers shared storage across cluster nodes
- D. Configures the network infrastructure
Answer: C
NEW QUESTION # 52
Which tool can be used to gather application and virtual environment workload of an existing environment?
- A. Secure Connect Gateway
- B. VxRail Sizer
- C. Live Optics
- D. VxRail Configuration Portal
Answer: C
Explanation:
Live Optics is the tool designed to gather detailed application and virtual environment workload data from existing environments to aid in sizing and planning VxRail deployments.
NEW QUESTION # 53
Which power supply configuration is recommended for a VxRail cluster?
Response:
- A. Solar-powered backup for environmental compliance
- B. Single power supply for cost-efficiency
- C. Redundant power supplies for high availability
- D. Portable power units for mobility
Answer: C
NEW QUESTION # 54
During the design process for a VxRail cluster, which consideration is most critical for workload optimization?
Response:
- A. Cluster firmware version
- B. Network bandwidth
- C. Fault tolerance settings
- D. Node discovery options
Answer: C
NEW QUESTION # 55
What is a primary advantage of using stretch clusters in VxRail?
Response:
- A. Faster deduplication processes
- B. Higher storage efficiency
- C. Enhanced security for data in transit
- D. Continuous data availability across sites
Answer: D
NEW QUESTION # 56
Which factors are critical to consider during the physical installation of a VxRail cluster?
(Choose two)
Response:
- A. Network cable lengths
- B. Default RAID configuration
- C. VMware vCenter version compatibility
- D. Proper rack grounding
Answer: A,D
NEW QUESTION # 57
A customer is planning to expand an existing VxRail vSAN cluster. Their current rack is full, so the cluster has to expand to an additional rack. Due to networking requirements, each rack is a Layer 2 boundary, so the new nodes require new management, vSAN, and vMotion subnets.
When designing the solution, what are two considerations that the architect should consider? (Choose two.)
- A. vSAN ESA is not supported. Only vSAN OSA is supported.
- B. VMware Cloud Foundation is not supported.
- C. VxRail Manager must remain in the first rack.
- D. Automatic node discovery is not supported; manual discovery must be used.
Answer: C,D
Explanation:
Because each rack is a Layer 2 boundary with different subnets, automatic node discovery is not supported, so manual discovery is required.
VxRail Manager must remain in the original rack to maintain cluster management continuity across racks.
NEW QUESTION # 58
What are the benefits of using Live Optics during VxRail planning?
(Choose two)
Response:
- A. Identifies bottlenecks in existing workloads
- B. Automates fault domain configuration
- C. Generates detailed workload reports
- D. Configures VLANs for network traffic
Answer: A,C
NEW QUESTION # 59
Which features are critical when deploying a VxRail cluster?
(Choose two)
Response:
- A. High-speed NICs
- B. vSAN data deduplication
- C. Redundant power supplies
- D. Fibre Channel switches
Answer: A,B
NEW QUESTION # 60
What are the benefits of using a vSphere Distributed Switch in a VxRail cluster?
(Choose two)
Response:
- A. Configures Fibre Channel zones
- B. Supports seamless traffic prioritization
- C. Enables dynamic IP allocation
- D. Simplifies cluster-wide network configuration
Answer: B,D
NEW QUESTION # 61
Which tool can be used to create VxRail projects and configurations?
Response:
- A. Dell OpenManage Enterprise
- B. VMware vSphere Client
- C. VxRail Sizing Tool
- D. VxRail Manager
Answer: D
NEW QUESTION # 62
......
Updated D-VXR-DS-00 Certification Exam Sample Questions: https://dumps4download.actualvce.com/EMC/D-VXR-DS-00-valid-vce-dumps.html