[Nov 01, 2024] Fast Exam Updates QREP dumps with PDF Test Engine Practice
Exam Valid Dumps with Instant Download Free Updates
NEW QUESTION # 10
Which are valid source endpoint types for Qlik Replicate change processing (CDC)? (Select two )
- A. Classic Relational RDBMS
- B. SAP ECC and Extractors
- C. MS Dynamics direct access
- D. Generic REST APIs Data Lake file formats
Answer: A,B
Explanation:
For Qlik Replicate's Change Data Capture (CDC) process, the valid source endpoint types include:
A: Classic Relational RDBMS: These are traditional relational database management systems that support CDC.Qlik Replicate can capture changes from these systems using log-based CDC tools which are integrated to work with most ETL tools1.
C: SAP ECC and Extractors: SAP ECC (ERP Central Component) and its extractors are also supported as source endpoints for CDC in Qlik Replicate.This allows for the replication of data changes from SAP's complex data structures1.
The other options provided are not typically associated with CDC in Qlik Replicate:
B: MS Dynamics direct access: While Qlik Replicate can connect to various data sources, MS Dynamics is not commonly listed as a direct source for CDC.
D: Generic REST APIs Data Lake file formats: REST APIs and Data Lake file formats are not standard sources for CDC as they do not maintain transaction logs, which are essential for CDC to track changes.
For detailed information on setting up source endpoints and enabling CDC, you can refer to the official Qlik documentation and community articles that discuss the prerequisites and configurations needed for various source endpoints2345.
NEW QUESTION # 11
When utilizing LogStream staging for replication, where is the Staging folder compressed and stored?
- A. On the backup server
- B. On the Qlik Replicate server
- C. With the target endpoint
- D. With the source endpoint
Answer: B
Explanation:
When using LogStream staging for replication in Qlik Replicate, the Staging folder is compressed and stored on the Qlik Replicate server itself. Here's the process:
A Log Stream Staging task is defined to replicate changes from the source endpoint to the Log Stream Staging folder1.
This task creates a "Staging" file in the Log Stream Staging folder, which contains the changes from the source database transaction log as a compressed binary file1.
The storage path for the streamed data, which includes the Staging folder, must be specified in the Log Stream target endpoint settings, and it is explicitly stated that this path should be located on the Replicate Server machine2.
Therefore, the correct answer isD. On the Qlik Replicate server, as the staging folder is located on the machine where Qlik Replicate server is running, and it is where the compressed staging files are stored12.
NEW QUESTION # 12
Which is the command to export the task, task name Oracle_2_SS_Target1 using REPCTL?
- A. repct1 export_task task=Oracle_2_SS_Target1
- B. repct1 exportrepository task=Oracle_2_SS_Target1
- C. repct1 exporttask task=0racle_2_SS_Target1
- D. repct1 export task-Oracle_2_SS_Target1
Answer: D
Explanation:
To export a task using REPCTL in Qlik Replicate, the correct command isrepctlexportrepository task=task_name. Here's how you would use it for the task named Oracle_2_SS_Target1:
Open the command-line console on the machine where Qlik Replicate is installed.
Use the REPCTL utility with theexportrepositorycommand followed by thetaskparameter and the name of the task you want to export.
The correct syntax for the command is:
repctl exportrepository task=Oracle_2_SS_Target1
This command will create a JSON file containing the exported task settings1.
The other options provided have either incorrect syntax or misspellings:
Ahas a typo in the command (repct1instead ofrepctl).
Buses an incorrect command (export_taskis not a valid REPCTL command).
Dhas a typo in the task name (0racle_2_SS_Target1instead ofOracle_2_SS_Target1) and an incorrect command (exporttaskis not a valid REPCTL command).
Therefore, the verified answer isC, as it correctly specifies the REPCTL command to export the task named Oracle_2_SS_Target11.
NEW QUESTION # 13
AQlik Replicate administrator is replicating data from a source system with some columns with large PDFs.
Which data type should be used?
- A. DLOB
- B. NCLOB
- C. BLOB
- D. NVARCHAR(IOOO)
Answer: C
Explanation:
For replicating columns that contain large PDFs, the appropriate data type to use in Qlik Replicate is:
D: BLOB: This stands for Binary Large Object and is the data type used for storing large binary data such as PDF files.The BLOB data type is suitable for handling the size and binary nature of PDF files1.
The other options are not suitable for the following reasons:
A: DLOB: This is not a recognized data type in Qlik Replicate.
B: NCLOB: NCLOB, or National Character Large Object, is used for storing large text data in the national character set and is not optimal for binary data like PDFs.
C: NVARCHAR(1000): NVARCHAR is a character data type with a specified length, which would not be suitable for large binary objects like PDFs due to size limitations and the nature of the data.
For more information on data types and their usage in Qlik Replicate, you can refer to the official Qlik Replicate documentation onReplicate data types.
NEW QUESTION # 14
How can the task diagnostic package be downloaded?
- A. Open task from overview -> Monitor -> Tools -> Support -> Download diagnostic package
- B. Download diagnostic package Go to server settings -> Logging -> Right-click task -> Support -> Download diagnostic package
- C. Right-click task from overview -> Download diagnostic package
- D. Open task from overview -> Run -> Tools -?
Answer: A
Explanation:
To download the task diagnostic package in Qlik Replicate, you need to follow these steps:
Open the task from the overview in the Qlik Replicate Console.
Switch to theMonitorview.
Click on theToolstoolbar button.
Navigate toSupport.
SelectDownload Diagnostic Package1.
This process will generate a task-specific diagnostics package that contains the task log files and various debugging data that may assist in troubleshooting task-related issues. Depending on your browser settings, the file will either be automatically downloaded to your designated download folder, or you will be prompted to download it.The file will be named in the format<task_name>__diagnostics__<timestamp>.zip12.
The other options provided do not accurately describe the process for downloading a diagnostic package in Qlik Replicate:
Bis incomplete and does not provide a valid path.
Cincorrectly suggests going to server settings and logging, which is not the correct procedure.
Dsuggests a method that is not documented in the official Qlik Replicate help resources.
Therefore, the verified answer isA, as it correctly outlines the steps to download a diagnostic package in Qlik Replicate12.
NEW QUESTION # 15
Theconnection to the source endpoint is unavailable over several days. The log files contain only 2 hours of data before being deleted. Which Is the safest way to create a consistent state in the target endpoint?
- A. Recover from a locally stored checkpoint
- B. Resume task and ignore warnings
- C. Start processing changes from a fixed date and time
- D. Use Reload Target Run option
Answer: D
Explanation:
When the connection to the source endpoint is unavailable for an extended period, and the log files are limited to only 2 hours of data before being deleted, the safest way to ensure a consistent state in the target endpoint is to use theReload Target Run option (A). This approach is recommended because it allows for a complete refresh of the target data, ensuring that it is in sync with the source once the connection is re-established.
TheReload Target Run optionis designed to handle situations where the replication logs are not sufficient to recover the replicated state due to extended outages or log retention policies. Byreloading the target, you can be confident that the data reflects the current state of the source, without relying on potentially incomplete change logs.
Starting processing from a fixed date and time (B) or recovering from a locally stored checkpoint would not be reliable if the logs do not cover the entire period of the outage. Resuming the task and ignoring warnings (D) could lead to inconsistencies due to missed changes.
Therefore, theReload Target Run optionis the safest method to create a consistent state in the target endpoint under these circumstances1.
NEW QUESTION # 16
Which files can be exported and imported to Qlik Replicate to allow for remote backup, migration, troubleshooting, and configuration updates of tasks?
- A. Task XML files
- B. Task CFG files
- C. Task JSON files
- D. Task INI files
Answer: C
Explanation:
In Qlik Replicate, tasks can be exported and imported for various purposes such as remote backup, migration, troubleshooting, and configuration updates. The format used for these operations is the JSON file format.
Here's how the process works:
To export tasks, you can use therepctl exportrepositorycommand, which generates a JSON file containing all task definitions and endpoint information (except passwords)1.
The generated JSON file can then be imported to a new server or instance of Qlik Replicate using therepctl importrepositorycommand, allowing for easy migration or restoration of tasks2.
This JSON file contains everything required to reconstruct the data replication project, making it an essential tool for administrators managing Qlik Replicate tasks3.
Therefore, the correct answer isD. Task JSON files, as they are the files that can be exported and imported in Qlik Replicate for the mentioned purposes123.
NEW QUESTION # 17
During the process of handling data errors, the Qlik Replicate administrator recognizes that data might be truncated Which process should be used to maintain full table integrity?
- A. Stop Task
- B. Suspend Table
- C. Log record to the exceptions table
- D. Ignore Record
Answer: C
Explanation:
When handling data errors in Qlik Replicate, especially when data might be truncated, maintaining full table integrity is crucial. The best approach to handle this situation is to log the record to the exceptions table.
Here's why:
Log record to the exceptions table (D): This option allows the task to continue processing while ensuring that any records that could not be applied due to errors, such as truncation, are captured for review and resolution.The exceptions table serves as a repository for such records, allowing administrators to address the issues without losing the integrity of the full dataset1.
Stop Task (A): While stopping the task will prevent further data processing, it does not provide a mechanism to handle the specific records that caused the error.
Suspend Table (B): Suspending the table will halt processing for that specific table, but again, it does not address the individual records that may be causing truncation issues.
Ignore Record : Ignoring the record would mean that the truncated data is not processed, potentially leading to data loss and compromising table integrity.
Therefore, the verified answer isD. Log record to the exceptions table, as it allows for the identification and resolution of specific data errors while preserving the integrity of the overall table data12.
NEW QUESTION # 18
Which is the path to add a new column to a single table in a task?
- A. Table Selection -> Schemas -> Add Column
- B. Table Settings -> General -> Add New Column
- C. New Transformation -> Column -> Add Column
- D. Select Table -> Transform -> Add New
Answer: B
Explanation:
To add a new column to a single table in a Qlik Replicate task, the correct path is throughTable Settings.
Here's the process you would typically follow:
Navigate to theTable Settingsof the table you wish to modify within your task.
Go to theGeneralsection.
Use the option toAdd New Column.
This process allows you to add a column directly to the table's schema as part of the task configuration. It's important to note that this action is part of the task's design phase, where you can specify the schema changes that should be applied to the data as it is replicated.
The other options listed, such asNew TransformationorSelect Table -> Transform, are not the direct paths for adding a new column to a table's schema within a task.They are related to different aspects of task configuration and transformation1.
NEW QUESTION # 19
A Qlik Replicate administrator will use Parallel load during full load Which three ways does Qlik Replicate offer? (Select three.)
- A. Use Time and Date Ranges in the date and time columns
- B. Select specific tables and columns
- C. Use Partitions - Use all partitions - Use main\sub-partitions
- D. Use Partitions - Specify partitions\sub-partitions
- E. Use Data Ranges
- F. User chooses a list of columns and set of values that define ranges
Answer: C,D,E
Explanation:
Qlik Replicate offers several methods for parallel load during a full load process to accelerate the replication of large tables by splitting the table into segments and loading these segments in parallel. The three primary ways Qlik Replicate allows parallel loading are:
Use Data Ranges:
This method involves defining segment boundaries based on data ranges within the columns.
You can select segment columns and then specify the data ranges to define how the table should be segmented and loaded in parallel.
Use Partitions - Use all partitions - Use main/sub-partitions:
For tables that are already partitioned, you can choose to load all partitions or use main/sub-partitions to parallelize the data load process. This method ensures that the load is divided based on the existing partitions in the source database.
Use Partitions - Specify partitions/sub-partitions:
This method allows you to specify exactly which partitions or sub-partitions to use for the parallel load. This provides greater control over how the data is segmented and loaded, allowing for optimization based on the specific partitioning scheme of the source table.
These methods are designed to enhance the performance and efficiency of the full load process by leveraging the structure of the source data to enable parallel processing
NEW QUESTION # 20
Which is the minimum level of permissions required for a user to delete tasks?
- A. Designer
- B. Viewer
- C. Operator
- D. Admin
Answer: A
Explanation:
According to the Qlik Replicate documentation, the minimum level of permissions required for a user to delete tasks is the Designer role. The predefined roles in Qlik Replicate come with different sets of permissions. The Admin and Designer roles have the permission to delete tasks, while the Operator and Viewer roles do not1.
Here's a breakdown of the permissions for each role related to task management:
Admin: Can create, design, and delete tasks.
Designer: Can create, design, and delete tasks.
Operator: Can perform runtime operations like start, stop, or reload targets but cannot delete tasks.
Viewer: Can view task history and other details but cannot perform task management operations like deleting tasks.
NEW QUESTION # 21
How can a Qlik Replicate administrator set all Incoming columns to match a single schema?
- A. Add Filter - Schema
- B. Table Selection - Schema
- C. Global Transformations - Add Filter
- D. Global Transformations - Schema
Answer: D
Explanation:
To set all incoming columns to match a single schema in Qlik Replicate, an administrator should use the Global Transformationsfeature. Here's the process:
Navigate to theGlobal Transformationssection within the Qlik Replicate task settings.
Within Global Transformations, there is an option to define transformations that apply to all tables and columns being replicated.
Use theSchemaoption within Global Transformations to specify the target schema for all incoming columns.
This approach ensures that all incoming data conforms to a predefined schema, which is particularly useful when consolidating data from multiple sources into a single target schema.It allows for the standardization of column names, data types, and other schema-related attributes across all tables involved in the replication task12.
The other options provided do not directly address the requirement to set all incoming columns to match a single schema:
A: Table Selection - Schema: This option is more about selecting which tables and schemas to include in the replication task, rather than defining a global schema for all columns.
B: Global Transformations - Add FilterandC. Add Filter - Schema: While filters are used to specify conditions for data transformation or selection, they do not provide a means to globally set the schema for all incoming columns.
Therefore, the verified answer isD. Global Transformations - Schema, as it is the correct method to set all incoming columns to match a single schema in Qlik Replicate12.
NEW QUESTION # 22
Which two task logging components are associated with a Full Load to a target endpomt? (Select two.)
- A. STREAM
- B. TARGET_APPLY
- C. TARGET_LOAD
- D. SOURCE UNLOAD
- E. FILE_TRANSFER
Answer: C,D
Explanation:
When performing a Full Load to a target endpoint in Qlik Replicate, the task logging components that are associated with this process areTARGET_LOADandSOURCE_UNLOAD.
TARGET_LOAD: This component is responsible for loading the data into the target endpoint.It represents the process where Qlik Replicate reads all columns/rows from the Source database and creates the exact same copy on the Target database1.
SOURCE_UNLOAD: This component is involved in unloading the data from the source endpoint.It is part of the Full Load process where the data is read from the source and prepared for transfer to the target2.
The other options provided are not directly associated with the Full Load process to a target endpoint:
TARGET_APPLYis related to the Change Data Capture (CDC) phase where changes from the source are applied to the target2.
FILE_TRANSFERis not a term directly associated with Qlik Replicate's logging components.
STREAMrefers to the Log Stream tasks, which is a different type of task configuration used for saving data changes from the transaction log of a single source database and applying them to multiple targets2.
For a comprehensive understanding of the task types and options in Qlik Replicate, you can refer to the official Qlik community articles onQlik Replicate Task Configuration OptionsandAn Introduction to Qlik Replicate Tasks: Full Load vs CDC.
NEW QUESTION # 23
A Qlik Replicate administrator is working on a database where thecolumn names in a source endpoint are too long and exceed the character limit for column names in the target endpoint.
How should the administrator solve this issue?
- A. Define a new Global Transformation rule of the Column type, and follow the prompts to filter and rename all columns in all tables
- B. Visit the Table Settings for each table and select the Filter tab to update all affected columns using a record selection condition
- C. Open the Windows command line terminal and run the renamecolumn command to update all affected columns of all tables
- D. Visit the Table Settings for each table in a task and select the Transform tab to update all affected columns within the Output pane
Answer: A
Explanation:
To address the issue of column names in a source endpoint being too long for the target endpoint's character limit, the Qlik Replicate administrator should:
D: Define a new Global Transformation rule of the Column type: This allows the administrator to create a rule that applies to all affected columns across all tables.By defining a global transformation rule, the administrator can systematically rename all columns that exceed the character limit1.
The process involves:
Going to the Global Transformations section in Qlik Replicate.
Selecting the option to create a new transformation rule of the Column type.
Using the transformation rule to specify the criteria for renaming the columns (e.g., replacing a prefix or suffix or using a pattern).
Applying the rule to ensure that all affected columns are renamed according to the defined criteria.
The other options are not as efficient or appropriate for solving the issue:
A: Open the Windows command line terminal and run the renamecolumn command: This is not a standard method for renaming columns in Qlik Replicate and could lead to errors if not executed correctly.
B: Visit the Table Settings for each table in a task and select the Transform tab: While this could work, it is not as efficient as defining a global transformation rule, especially if there are many tables and columns to update.
C: Visit the Table Settings for each table and select the Filter tab: The Filter tab is used for record selection conditions and not for renaming columns.
For more detailed instructions on how to define and apply global transformation rules in Qlik Replicate, you can refer to the official Qlik documentation onGlobal Transformations.
NEW QUESTION # 24
Which logging level should be used to identify the internal command that Qlik Replicate Is executing prior to an error?
- A. Warnings
- B. Verbose
- C. Trace
- D. Errors
Answer: C
Explanation:
To identify the internal commands that Qlik Replicate is executing prior to an error, theTracelogging level should be used.This level provides detailed information about the operations being performed by Qlik Replicate, including the internal commands executed before an error occurs1.
Here's how the Trace logging level works in Qlik Replicate:
When logging is set toTrace, the log lines are identified with]T:.This indicates that the log will include detailed trace information about the internal workings of Qlik Replicate, such as sending control records to components or waiting for termination of threads1.
The Trace level is more detailed than Warnings (]W:) and Errors (]E:), which only show warning and error messages without the detailed context of the operations leading up to them1.
The Trace level is also distinct from Verbose (]V:), which provides even more detailed logging information but may not be necessary for identifying the commands leading up to an error1.
Therefore, the correct answer isC. Trace, as it is the appropriate logging level to use when you need to analyze the actions performed by Qlik Replicate just before an error occurs1.
NEW QUESTION # 25
When working with Qlik Enterprise Manager, which component must be installed to run Analytics under Enterprise Manager?
- A. PostgreSQL Database
- B. Qlik Compose
- C. Qlik Compose and Replicate
- D. Qlik Replicate
Answer: A
Explanation:
To run Analytics under Qlik Enterprise Manager, it is required to have aPostgreSQL Databaseinstalled.
This is because the Analytics data for Qlik Enterprise Manager is stored in a PostgreSQL database.Before using the Analytics feature, you must ensure that PostgreSQL (version 12.16 or later) is installed either on the Enterprise Manager machine or on a machine that is accessible from Enterprise Manager1.
Here are the steps and prerequisites for setting up Analytics in Qlik Enterprise Manager:
Install PostgreSQL: The setup file for PostgreSQL is included with Enterprise Manager, and it must be installed to store the Analytics data1.
Create a dedicated database and user: A dedicated database and user in PostgreSQL should be created, which will own the tables accessed by the Enterprise Manager Analytics module1.
Configure connectivity: Connectivity to the PostgreSQL repository must be configured as described in the Repository connection settings1.
Data collection and purging: Configure data collection and purging settings as described in the Analytics - Data collection and purge settings1.
Register a license: A Replication Analytics license is required to use Analytics.If you have a license, you can register it by following the procedure described in Registering a license1.
The other options provided, such as Qlik Replicate (A), Qlik Compose (B), and both Qlik Compose and Replicate (D), are not components that must be installed to run Analytics under Enterprise Manager.The essential component is the PostgreSQL Database , which serves as the backend for storing the Analytics data1.
Therefore, the verified answer isC. PostgreSQL Database, as it is the required component to run Analytics under Qlik Enterprise Manager1.
NEW QUESTION # 26
A Qlik Replicate administrator has stopped the Qlik Replicate services.
Which are the next three steps to change the Data Directory location on Windows? (Select three.)
- A. Uninstall Qlik Replicate and reinstall with the option to move the data directory to a different location
- B. Move the data directory to a new location
- C. Start the Attunity Replicate services
- D. Stop the Attunity Replicate Ul Server and Attunity Replicate Server services
- E. Update the Windows Registry
- F. Copy the data directory to a shared drive and keep all tasks running
Answer: B,C,E
Explanation:
To change the Data Directory location on Windows for Qlik Replicate, the administrator needs to follow these steps after stopping the Qlik Replicate services:
E: Move the data directory to a new location: The first step is to physically move the data directory to the new desired location on the file system1.
A: Update the Windows Registry: After moving the data directory, the next step is to update the Windows Registry to reflect the new location of the data directory.This involves modifying theImagePathstring within theHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servicesfor both the Qlik Replicate UI Server and Qlik Replicate Server services1.
F: Start the Attunity Replicate services: Once the data directory has been moved and the Windows Registry has been updated, the final step is to start the Qlik Replicate services again.This will allow Qlik Replicate to operate using the new data directory location1.
The other options are not part of the recommended steps for changing the Data Directory location:
B: Uninstall Qlik Replicate and reinstall: This is not necessary just for changing the data directory location.
C: Copy the data directory to a shared drive and keep all tasks running: It is not recommended to use a shared drive for the data directory, and tasks cannot run during this process since the services need to be stopped.
D; Stop the Attunity Replicate Ul Server and Attunity Replicate Server services: This is a prerequisite step that should have already been completed before proceeding with the data directory change.
For a complete guide on changing the Data Directory location on Windows, the official Qlik documentation provides detailed instructions and considerations1.
NEW QUESTION # 27
Which are limitations associated with Qlik Replicate stream endpoint types (e.g.. Kafka orAzure Event Hubs)? (Select two.)
- A. The Full Load replication option is not supported
- B. The Store Changes replication option is not supported.
- C. The Apply Changes replication option is not supported.
- D. Associated tasks filling those endpoint types cannot be stopped.
- E. The DROP and CREATE table target table preparation option is not supported
Answer: B,E
Explanation:
For stream endpoint types like Kafka or Azure Event Hubs in Qlik Replicate, there are specific limitations that apply to the replication options and target table preparation options:
D: The Store Changes replication option is not supported: This limitation is explicitly mentioned for Kafka1and Azure Event Hubs23. The Store Changes mode is not supported when using these stream endpoints, meaning that changes cannot be stored for later retrieval or reporting.
E: The DROP and CREATE table target table preparation option is not supported: This is also a known limitation for Kafka as a target endpoint1. The Drop and Create table Target Table Preparation option is not supported, which affects how tables are prepared on the target side during replication.
The other options are not correct because:
A: The Apply Changes replication option is not supported: This is not listed as a limitation for Kafka or Azure Event Hubs.
B: The Full Load replication option is not supported: Full Load is supported for Kafka1.
C: Associated tasks filling those endpoint types cannot be stopped: This is not mentioned as a limitation, and tasks can typically be stopped unless otherwise specified.
For more detailed information on the limitations of using Kafka or Azure Event Hubs as target endpoints in Qlik Replicate, you can refer to the official Qlik documentation123.
NEW QUESTION # 28
Which information in Qlik Replicate can be retrieved from the server logs?
- A. Load status and performance of task
- B. Specific task information
- C. Qlik Replicate Server status
- D. Network and performance issues
Answer: C
Explanation:
The server logs in Qlik Replicate provide information about the Qlik Replicate Server instance, rather than individual tasks.The logs can include various levels of information, such as errors, warnings, info, trace, and verbose details1. Specifically, the server logs can provide insights into:
Network and performance issues: These might be indicated by error or warning messages related to connectivity or performance bottlenecks.
Load status and performance of task: While the server logs focus on the server instance, they may contain information about the overall load status and performance, especially if there are server-level issues affecting tasks.
Specific task information: The server logs can include information about tasks, particularly if there are errors or warnings that pertain to task execution at the server level.
Qlik Replicate Server status: This includes general information about the server's health, status, and any significant events that affect the server's operation.
Therefore, while the server logs can potentially contain a range of information, the primary purpose is to provide details on theQlik Replicate Server status(D), including any issues that may impact the server's ability to function properly and manage tasks231.
NEW QUESTION # 29
Which is the default port of Qlik Replicate Server on Linux?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
The default port for Qlik Replicate Server on Linux is3552. This port is used for outbound and inbound communication unless it is overridden during the installation or configuration process. Here's a reference to the documentation that confirms this information:
The official Qlik Replicate documentation states that "Port 3552 (the default rest port) needs to be opened for outbound and inbound communication, unless you override it as described below." This indicates that 3552 is the default port that needs to be considered during the installation and setup of Qlik Replicate on a Linux system1.
The other options provided do not correspond to the default port for Qlik Replicate Server on Linux:
A: 3550: This is not listed as the default port in the documentation.
B: 443: This is commonly the default port for HTTPS traffic, but not for Qlik Replicate Server.
C: 80: This is commonly the default port for HTTP traffic, but not for Qlik Replicate Server.
Therefore, the verified answer isD. 3552, as it is the port designated for Qlik Replicate Server on Linux according to the official documentation1.
NEW QUESTION # 30
Which piece of information is stored and can be modified in the Provider Syntax?
- A. Schema definition of the endpoints
- B. Username and permission of the endpoints
- C. Endpoint definition - Servername and port number
- D. Data Type Mapping
Answer: D
Explanation:
The Provider Syntax in Qlik Replicate is used to define and modify certain behaviors and properties of the replication process. Specifically, it allows for the creation of a custom syntax for various operations and mappings. The information that can be stored and modified in the Provider Syntax includes:
Data Type Mapping (D): This involves creating mappings between the provider data types and Attunity Replicate data types.It allows for the customization of how data types are handled during the replication process1.
The other options provided do not align with the capabilities of the Provider Syntax:
A: Endpoint definition - Servername and port number: This information is typically configured in the endpoint settings, not within the Provider Syntax.
B: Username and permission of the endpoints: Usernames and permissions are also configured in the endpoint settings or within the security configurations of the respective systems.
C: Schema definition of the endpoints: While the schema definition is crucial for replication, it is not something that is typically modified within the Provider Syntax.
Therefore, the verified answer isD. Data Type Mapping, as it is the piece of information that is stored and can be modified within the Provider Syntax according to the Qlik Replicate documentation21.
NEW QUESTION # 31
The Qlik Replicate administrator adds a new column to one of the tables in a task What should the administrator do to replicate this change?
- A. Stop task, enable__CT tables, and resume
- B. Stop and reload the task
- C. Stop and resume the task
- D. Change the DDL Handling Policy to accommodate this change
Answer: C
Explanation:
When a new column is added to one of the tables in a Qlik Replicate task, the administrator should stop and then resume the task to replicate this change. This process allows Qlik Replicate to recognize the structural change and apply it accordingly.
The steps involved in this process are:
Stop the task: This ensures that no data changes are missed during the schema change.
Resume the task: Once the task is resumed, Qlik Replicate will pick up the DDL change and apply the new column to the target system.
This procedure is supported by the Qlik Replicate's DDL handling policy, which can be set to perform an
"alter target table" when the source table is altered.This means that when the task is resumed, the new columns from the source tables will be added to the Replicate target1.
It's important to note that while stopping and resuming the task is generally the recommended approach, the exact steps may vary depending on the specific configuration and version of Qlik Replicate being used.
Therefore, it's always best to consult the latest official documentation or support resources to ensure the correct procedure for your environment.
NEW QUESTION # 32
......
Download QREP Exam Dumps PDF Q&A: https://dumps4download.actualvce.com/Qlik/QREP-valid-vce-dumps.html