Pass EMC Dell NetWorker Deploy v2 Exam Exam in First Attempt Guaranteed Updated Dump from ActualVCE!
Pass D-NWR-DY-01 Exam with 754 Questions - Verified By ActualVCE
NEW QUESTION # 358
What method is used by Clone Controlled Replication to create identical copies of save sets on two devices?
- A. Recover Pipe to Save
- B. Block Based Backup
- C. Virtual Synthetic Full
- D. Parallel Save Stream
Answer: A
NEW QUESTION # 359
Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
- A. Provider
- B. Writer
- C. Requestor
- D. Interceptor
Answer: A
NEW QUESTION # 360
What is the EMC NetWorker nsraddadmin command used for?
- A. Adding new EMC NetWorker clients
- B. Adding new EMC NetWorker Storage Nodes
- C. Adding administrators to EMC NetWorker
- D. Allowing EMC NetWorker Servers to back up specific clients
Answer: C
NEW QUESTION # 361
An EMC NetWorker customer has one tape library with two tape drives. The customer has determined that 10 save sets, running in parallel, will optimize the throughput to the individual tape drives.
Which parameter can be changed so that the optimal amount of save sets is sent to one tape drive before using the next drive?
- A. Client parallelism
- B. Server parallelism
- C. Target sessions
- D. Group parallelism
Answer: C
NEW QUESTION # 362
A backup administrator configures an EMC NetWorker staging policy to move save sets from backup Device A to backup Device B.
A restore session requires save sets that were staged to Device B.
What is the data flow in this recovery?
- A. Data is reconstructed from Device B to Device A through the storage node and then sent back to the client
- B. Data flows from Device B through the storage node to the NetWorker server and then to the client
- C. Data is restored to the storage node and copied to the client
- D. Data flows from Device B through the storage node and then to the client
Answer: D
NEW QUESTION # 363
Refer to the exhibit.
How many nsrmmd processes are running on each remote storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 364
An implementation engineer is integrating NetWorker with a PowerProtect DD appliance running DDOS 5.7 and wants to use Optimized Performance Mode for a VMware group. The configuration fails.
What is a reason for the failure?
- A. The daemon.raw file on the NetWorker server must be updated with the FQDN of the PowerProtect DD appliance.
- B. DD OS 5.7 requires the shared library to use Optimized Performance Mode.
- C. The NMC service and NetWorker server service must be installed on separate hosts.
- D. An updated DDOS version is required to use Optimized Performance Mode.
Answer: D
Explanation:
The "Optimized for Performance" backup optimization mode is only supported on Data Domain systems running DDOS 6.0.0.30 (or later) - and if you're on the 5.7 release train, you must be at least at DDOS 5.7.1.
Attempting to enable Performance mode on a DD appliance at plain DDOS 5.7.0 will cause the configuration to fail (or fall back to Capacity mode) with a warning in the logs.
NEW QUESTION # 365
Refer to the exhibit.
What is the purpose of the Change Browse Time window when performing a recover in EMC Net Worker User?
- A. Display all recoveries from that client
- B. Determine the time and date for the volume used for the backup
- C. Show the time of the last recovery
- D. View the Client File Index as it was at a specific point in time
Answer: D
NEW QUESTION # 366
In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon, nsrd?
- A. Provide the read and write service for NetWorker CFI databases
- B. Manage the NetWorker media database
- C. Start other NetWorker server and storage node daemons
- D. Coordinate all scheduled backups
Answer: C
NEW QUESTION # 367
What is the effect of disabling Recover Pipe to Save (RPS) on the NetWorker server?
- A. All clones fail.
- B. VBA restore fails.
- C. All clones are slower.
- D. Vproxy clones are slower.
Answer: B
NEW QUESTION # 368
Which type(s) of Dell EMC NetWorker devices need to be created to implement NetWorker integration with Data Domain Cloud Tier?
- A. Cloud Tier and CloudBoost devices only
- B. Data Domain devices only
- C. Data Domain, Cloud Tier, and CloudBoost devices
- D. Data Domain and Cloud Tier devices only
Answer: D
NEW QUESTION # 369
A Lotus Notes administrator wants to perform backups of their Partitioned Domino servers. They are planning to deploy NMDA.
What objects can be backed up at the incremental level?
- A. Domino databases, transaction logs, and DAOS directory
- B. Domino databases and transaction logs only
- C. Transaction logs only
- D. Transaction logs and DAOS directory only
Answer: A
NEW QUESTION # 370
An incremental backup is performed and combined with the most recent full backup and subsequent incremental backups to make a new full backup. A non-PowerProtect DD series appliance is used.
Which backup level is described?
- A. Incremental
- B. Cumulative Incremental
- C. Synthetic Full
- D. Virtual Synthetic Full
Answer: C
NEW QUESTION # 371
An EMC NetWorker environment, what is the minimum number of ports required per storage node in a non-AFTD device?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 372
Which Microsoft technologies are supported with block based backups with the Dell EMC NetWorker Module for Microsoft?
- A. SQL server and Exchange server
- B. Exchange server and Hyper-V
- C. SharePoint server and SQL server
- D. Active Directory and Hyper-V
Answer: B
NEW QUESTION # 373
Which NetWorker resource determines the level of backup performed by the client or group?
- A. Policies
- B. Action
- C. Pool
- D. Directive
Answer: B
NEW QUESTION # 374
Which type of device is referred to as a BOOST device?
- A. Data Domain
- B. File Type
- C. Cloud
- D. Advance File Type
Answer: A
NEW QUESTION # 375
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. No additional software is required.
- B. Logical Volume Manager is required.
- C. NetWorker Block-based Backup software is required.
- D. NetWorker Extended Client software is required.
Answer: C
NEW QUESTION # 376
An EMC NetWorker administrator creates a file called "myfile". The file contains: print type: NSR client.
What is displayed when the command, nsradmin -i myfile, is executed?
- A. Only the names of the clients in the data zone
- B. Configuration information for all clients in the data zone
- C. List of clients backing up the save set "myfile"
- D. List of clients that are currently enabled
Answer: B
NEW QUESTION # 377
A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated backups using NMM with block based backups (BBB). However, the backup failed when attempting to write to AFTDs.
What is the possible reason for the backup failure?
- A. Client Direct is not enabled
- B. Federated backups are not supported with BBB
- C. nsrnmmsv backup command was used
- D. AFTD is not supported with BBB
Answer: A
NEW QUESTION # 378
Client_A is a client in an EMC NetWorker environment. There are two EMC NetWorker servers: Server_A and Server_B. Server_A is local to Client_A while Server_B is located across a WAN. In addition, there is one storage node, StorageNode_B, defined on Server_B.
You notice that there are no entries in the /nsr/res/servers file on Client_A.
Which system is allowed to back up data from Client_A?
- A. No systems are allowed to back up Client_A
- B. Server_B only
- C. Any NetWorker server
- D. Server_A only
Answer: C
NEW QUESTION # 379
In EMC NetWorker, what is contained in a single CFI record?
- A. Hash of backup contents
- B. Backup media device
- C. Path name of a file
- D. Backup volume information
Answer: C
NEW QUESTION # 380
......
Penetration testers simulate D-NWR-DY-01 exam: https://dumps4download.actualvce.com/EMC/D-NWR-DY-01-valid-vce-dumps.html