H31-341_V2.5-ENU Dumps To Pass Huawei Exam in 24 Hours - ActualVCE
Buy Latest H31-341_V2.5-ENU Exam Q&A PDF - One Year Free Update
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) Certification Exam consists of two parts: a written exam and a lab exam. The written exam consists of 60 multiple-choice questions and has a time limit of 90 minutes. The lab exam, on the other hand, is a hands-on practical exam that tests the candidate's ability to configure and troubleshoot transmission network devices. The lab exam has a time limit of four hours and is conducted in a simulated network environment. Candidates who pass both the written and lab exams are awarded the HCIP-Transmission V2.5 certification, which is recognized globally as a mark of excellence in the field of transmission network technologies.
NEW QUESTION # 253
According to the G.709 protocol, how many ODU2e signals can one ODU3 signal multiplex at most?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 254
In the troubleshooting scenario, which of the following descriptions about the channels for obtaining signal flow information is wrong?
- A. Network management, which can display the signal flow of the fixed network level, and provide corresponding alarm and performance information at the same time
- B. Wavelength allocation diagram, which can display detailed wavelength paths
- C. Network diagram of the entire network, used for segment division during fault location
- D. Fiber connection diagram, for a single station, is the actual fiber connection diagram within the site
Answer: B
NEW QUESTION # 255
In the SDH optical synchronous transmission system. Which of the following bytes is used to transmit the quality and usage information of the clock source?
- A. G1
- B. S1
- C. N1
- D. M1
Answer: B
NEW QUESTION # 256
LAG can only be configured in non-load sharing mode
- A. True
- B. False
Answer: B
NEW QUESTION # 257
The inter-board crossover refers to the cross-connection configured between different single boards. Which inter-board crossover between boards can be realized on the network management? (Multiple choice)
- A. Between LU and LU
- B. Between TU and TU
- C. Between OTU and OTU
- D. Between TU and LU
Answer: A,B,C,D
NEW QUESTION # 258
Which of the following overhead bytes in VC4 high-order path overhead is functionally similar to the low-order path overhead byte V5 in VC12? (Multiple choice)
- A. J1
- B. G1
- C. C2
- D. B3
Answer: B,C,D
NEW QUESTION # 259
PWE3 is a Layer 2 service bearer technology that can imitate the basic behavior and characteristics of which of the following services as realistically as possible in the packet switching network PSN?
- A. ATMs
- B. Ethernet
- C. All of the above
- D. TDM
Answer: C
NEW QUESTION # 260
In the link dynamic aggregation scenario, which of the following descriptions about the LACP protocol is correct? (Multiple choice)
- A. The LACP protocol does not support setting the minimum number of link activations for LA6
- B. LACP protocol supports setting the minimum link activation number of LAG
- C. Adding and deleting member ports needs to run the LACP protocol
- D. Adding and deleting member ports does not need to run the LACP protocol
Answer: B,C
NEW QUESTION # 261
The sink function of the TCM sublayer includes monitoring overhead and reporting defect information. Which of the following is wrong about the defect information reported by the TCM sublayer? (Multiple choice)
- A. Will report DEG
- B. Will report to BIAE
- C. TTI will be reported
- D. Will report to BDI
Answer: A,B,D
NEW QUESTION # 262
In MRPS protection, when a fault occurs, the Raw label is swapped into a Rap label and switched to the protection channel.
- A. True
- B. False
Answer: B
NEW QUESTION # 263
Which of the following site types does not support business up and down?
- A. ROADM
- B. FOADM
- C. OLA
- D. OTM
Answer: C
NEW QUESTION # 264
A VC-4 can transmit () VC-12, that is () 2.048 Mbit/s signals.
Answer:
Explanation:
63 | 63
NEW QUESTION # 265
The trigger condition for automatic protection switching of 1+1 optical line protection is SF (signal failure), and the two alarms involved are () and ()
Answer:
Explanation:
MUT_LOS | POWER_DIFF_OVER
NEW QUESTION # 266
Which of the following communication protocols are used for DCN management of Huawei equipment? (Multiple choice)
- A. HWECC
- B. OSI
- C. TCP/IP
- D. FTP
Answer: A,B,C
NEW QUESTION # 267
The functions of MG-SDH digital single-core can be expanded through software upgrades.
- A. True
- B. False
Answer: B
NEW QUESTION # 268
Which of the following are the classification of Ethernet performance test? (Multiple choice)
- A. Network performance testing
- B. Custom Tests
- C. Network Equipment Performance Verification Test
Answer: A,B,C
NEW QUESTION # 269
100mw is approximately equal to how many dBm?
- A. 15dBm
- B. 13dBm
- C. 10dBm
- D. 20dBm
Answer: D
NEW QUESTION # 270
Which of the following maintenance signals are contained in the STAT bits of PM and TCM in the maintenance signals at the ODUk level? (Multiple choice)
- A. AAIS
- B. LCK
- C. OCI
- D. IAE
Answer: A,B,C
NEW QUESTION # 271
The SDH frame structure is a rectangular block frame with which of the following options as the unit.
- A. frame
- B. block
- C. bytes
- D. bit
Answer: C
NEW QUESTION # 272
NG WDM system fault analysis methods include signal flow analysis method, alarm analysis method, instrument test method, () and replacement method.
Answer:
Explanation:
Loopback method
NEW QUESTION # 273
For SDH equipment, in the frame structure of STM-N, the rate corresponding to each bit is () Kb/s
Answer:
Explanation:
8
NEW QUESTION # 274
MAC loopback and PHY loopback are used for fault location. When the MAC loopback is set to in loop, the PHY loopback can be set according to the actual situation.
- A. True
- B. False
Answer: B
NEW QUESTION # 275
......
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) Certification Exam is a certification program designed to validate the skills and knowledge related to transmission technologies of Huawei equipment. The HCIP-Transmission V2.5 certification exam is an advanced level certification program that focuses on validating the knowledge and skills of transmission network engineers. HCIP-Transmission V2.5 certification exam covers all aspects of transmission technologies, including optical transmission, Ethernet transmission, microwave transmission, and access network technologies.
Download the Latest H31-341_V2.5-ENU Dump - 2025 H31-341_V2.5-ENU Exam Question Bank: https://dumps4download.actualvce.com/Huawei/H31-341_V2.5-ENU-valid-vce-dumps.html